Search
Search for »*«
20761 search results
-
Z-10.49-625
Sandwichelemente "Trimoterm Power T" und "Qbiss One T" nach DIN EN 14509 mit einer Mineralwolle-Kernschicht zwischen Stahldeckschichten; für Wand-, Decken- und Dachkonstruktionen
-
ETA-05/0090
DURISOL - shuttering blocks made of wood-chip concrete
-
EUROCODE Conference 2023 at DIBt: Great interest in the 'second generation' of the Eurocodes
It is not every day that more than 1,500 structural design engineers, architects, specifiers, experts and regulators from 66 countries around the world come together for a hybrid conference. The ... I -
Sealing systems made of concrete in SFH facilities
To create (load-bearing) surface seals for retaining systems, such as collecting trays, rooms or surfaces, in storage, filling and handling facilities for substances hazardous to water (SFH facilities -
Balanced flue systems
Balanced flue systems are room-sealed appliances, meaning that instead of using the air of the heating room as combustion air, outside air is supplied to the appliance. Balanced flue systems convey co -
Fittings, components and thermal insulation products for chimneys
Chimneys for solid fuels serve to discharge flue gases from the combustion of solid fuels into the outside atmosphere via an outlet above roof level. They can also be used to discharge flue gases from -
Cross-sectional reductions for chimneys
Cross-sectional reductions for existing chimneys are used for renovation and/or modernisation. The purpose may be to upgrade the chimney for operation under wet conditions or adapt the cross section o -
Catalysts for firing systems
Catalysts are used in firing systems to optimise the combustion processes and reduce the amount of harmful flue gas substances produced. Heating appliances, chimneys -
Special fittings for tanks for substances hazardous to water
Various construction products that serve as safety devices within the meaning of water legislation and contribute to preventing damage to water bodies are referred to as 'special fittings for tanks fo -
Hold-open devices
A hold-open device is a system of devices or device combinations suitable for the controlled disabling of the function of closing devices. Hold-open devices may be used on fire doors, smoke control do -
Closures and closure systems for inspection openings
Closures and closure systems for inspection opening are used to seal revision openings in fire-resistant service ducts or suspended ceilings inside a building or structural work. They prevent fire or -
Fixings bonded to the roof waterproofing
For penetration-free fixing of photovoltaic systems or fall protection to the roof, the fixings can be bonded or welded to the roof waterproofing membrane. The roof waterproofing thus takes on a struc -
Walk-on glazing, accessible glazing and glazing with fall-through protection
Walk-on glazing is designed for foot traffic. A vertical imposed load of maximum 5 kN/m 2 is assumed under normal use conditions. Glazing accessible for maintenance and glazing with fall-through prote -
Barrier glazing
Barrier glazing is glazing designed to prevent people from falling to a lower level. In the event of impact on the glazing, the risk of injury is supposed to be low. Furthermore, the lower-lying traff -
Linearly supported glazing
With linearly supported glazing, the glass panes are continuously fixed via a linear mechanical glass support (e.g. profile) with a glass insertion depth. The glazing system is installed in such a man -
Overhead glazing
Overhead glazing (also known as 'horizontal glazing') is understood to be glazing with an angle of inclination of more than 10° with respect to the vertical plane. With overhead glazing, it is assumed -
Point supported vertical glazing
With point supported glazing, the glass pane is mechanically fixed to the substructure either via point fasteners installed in drilled holes or via clamps (edge clamps). Point supported glazing is use -
Structural sealant glazing
With structural sealant glazing, glass panes are bonded to frame profiles at the factory (primarily using silicone adhesive and with a linear adhesive bead). This prefabricated structural sealant glaz -
Limit switches
Limit switches are safety devices within the meaning of water legislation, installed in tank vehicles and acting together with overfill prevention devices to interrupt the filling operation before the -
Leakage indication systems for tanks and pipes
Leakage indication systems serve to detect liquids hazardous to water that have escaped from tanks or pipes into the collecting device. In this case, a visual and/or acoustic signal is triggered. Leak -
Leak detection linings for tanks and pipes
Leak detection linings serve to create a second skin within the meaning of water legislation in single-skin tanks or containers. For this purpose, an internal lining is inserted into a single-skin tan -
Leak detection systems for double-skin tanks or double-skin pipes
A leak detection system is used to monitor the tightness of both the primary and the secondary skin of a double-skin tank or pipe within the meaning of water legislation. For this purpose, any deviati -
Overfill prevention devices
Overfill prevention devices are safety devices within the meaning of water legislation that interrupt the filling operation or trigger an audible/visual alarm before the maximum permitted filling leve -
Fire-resistant damper of special construction technique and application incl. accessories
A fire-resistant damper of special construction technique and application is a construction technique for sealing fire compartments. It mainly consists of a shut-off device integrated into a fire-resi -
Amalgam separators
Amalgam separators serve to treat wastewater containing amalgam residues from treatment units in dental practices. Separator systems